led street light bulb

High power LED street lamp

Item No: HPLED 001

China Faryuan Supply: High Power LED street lamps are with long service life, energy conservation, environmental protection, high luminance, good stability, easy installation and good suitability, etc.

• Uniformly distributed light and color without lens or halo.
• Great illuminating angle:
• Accurate constant-current driving with current fluctuation less than 1mA
• Strict temperature control
• Special circuit protection
• Variable power

Main applications: Solar Products, the street lamps on main and minor road.

50W Hi-power LED Street Lamp

Item No: HPLED 50W

• Uniformly distributed light and color without lens or halo.
• Great illuminating angle:
• Accurate constant-current driving with current fluctuation less than 1mA
• Strict temperature control
• Special circuit protection
• Variable power
Main applications: For Road or Street Usage.
Voltage: 12/24V DC,110/220V AC
Luminous flux: 3500lm
Service life: >50000 Hours
Color Rendering :> 80CRI Casing Material: Aluminum alloy die casting
Dimension: 530mm×260mm×140mm

80W Hi-power LED Road Lightings

Item No: HPLED 80W


LED Quantity: 80pcs
Power: 80W
Voltage: 12/24V DC,110/220V AC
Luminous flux: 5600lm
Service life: >50000 Hours
Color Rendering :> 80CRI
Casing Material: Aluminum alloy die casting
Dimension: 860mm×310mm×200mm

100W Hi-power LED Road Lampes

Item No: HPLED 100W

LED Quantity: 100pcs
Power: 100W
Voltage: 12/24V DC,110/220V AC
Luminous flux: 7000lm
Service life: >50000 Hours
Color Rendering :> 80CRI
Casing Material: Aluminum alloy die casting
Dimension: 860mm×310mm×200mm

High power LEDs Road Lamps

High power LEDs (HPLED) can be driven at hundreds of mA (vs. tens of mA for other LEDs), some with more than one ampere of current, and give out large amounts of light. Since overheating is destructive, the HPLEDs must be highly efficient to minimize excess heat; furthermore, they are often mounted on a heat sink to allow for heat dissipation.
If the heat from a HPLED is not removed, the device will burn out in seconds. (Solid-state lighting and LED lamp)

A single HPLED can often replace an incandescent bulb in a flashlight, or be set in an array to form a powerful LED lamp.

LEDs have been developed that can run directly from mains power without the need for a DC converter. For each half cycle part of the LED emits light and part is dark, and this is reversed during the next half cycle. The efficiency of HPLEDs is typically 40 lm/W[42]. As of November 2008 some HPLEDs manufactured by Cree, Inc exceed 95 lm/W [43] (e.g. the XLamp MC-E LED chip emitting Cool White light) and are being sold in lamps intended to replace incandescent, halogen, and even fluorescent style lights as LEDs become more cost competitive.

Descriptions of Street light, Road Lamps

A street light , lamppost, street lamp, road light, light standard, or lamp standard is a raised source of light on the edge of a road, which is turned on or lit at a certain time every night.

Modern lamps may also have light-sensitive photocells to turn them on at dusk, off at dawn, or activate automatically in dark weather. Also, it is not uncommon for street lights to be on posts which have wires strung between them, such as on telephone poles or utility poles.